ø Realtouch Forum ø

I'll put a control up on ebay next week if there is a market. I'm still working out individual belt control. Trying to come up with a just way thean a bunch on toggle switches.

Realagent

(12-08-2009 03:15 PM)realagent Wrote: [ -> ]I'll put a control up on ebay next week if there is a market. I'm still working out individual belt control. Trying to come up with a just way thean a bunch on toggle switches.

Realagent

Thanks much for posting the pinout, that'll save others (including me when I get one) much work, and reduce danger of breaking something in an expensive toy.

If you don't mind my asking, do you know what voltage (and how much current) the top/bottom/orifice motors take?

Thanks again,

impulse321 @t yah00 d0t c0m

---

BTW, I'm thinking that the RealTouch + this hardware hack + a USB Arduino board would provide much of what'd be needed to have a computer control it, in an open manner.
I know next to nothing about embedding control data into Audio/Visual files, though.

What do you guys think about such an approach?

anyone ripped some streams?
or may'be site exploit, offline explorer...?

would to see in some code...

for the software try with midi controllers & sony acid, Cubase or Pro Tools
you can put notes with video in one kind of a file...
sending signal to the device.. or rewire midicontroller to realtouch device.
just a way of thinking, may'be it works.
they must use a fast way to get some cue points on the vids where where the device should do some actions.
it could be a way of thinking.. give it a try

question, do you play the movies as stream in windows media player or streaming at the website?
do you have to install a plugin in media player to view the movies?

If you don't mind my asking, do you know what voltage (and how much current) the top/bottom/orifice motors take?

Thanks again,

impulse321 @t yah00 d0t c0m

---

I hardware box i came up with used the original power supply that came with the unit at 18v dc. It is a laptop power supply.

Version 2 uses a 12v power supply for outdoor or deck lights available at Home Depot. It is cheaper than a laptop supply and works as well. I am currently working on a way to vary or slow down the motors. Sort of like a dimmer control for the belts.

Realagent

(11-10-2009 01:29 PM)shunt1 Wrote: [ -> ]The "golden hack" is when you can modify your own videos to control the Real Touch in ways that are most pleasing to you.

I was thrilled when I was able to record and make video loops of "interesting" movements, but that was still rather limiting.

Darn, I wish that Real Touch (AEBN) would sell me that software. I have always been willing to pay for this outstanding product.

Hey shunt man how was you able to record or capture a clip? what program did you use? i tried fraps but im using an old old version. it recorded the video but didnt get the encoding. so my machine wont do anything with that. or do you have msn messnger? you can send me your clip over that..helll ide paypal you for that clip or any others you got that will work in windows media player let me know

I have been busy at work and have not had much time to work on the 2.0 version however I did finally get and install a speed control switch for the belts and that makes a world of difference. I'll post more when i finish the design. I have not even though about pricing yet. I want a good durable design that will last because this pay per minute stuff is not my style. Right now my design weakness is in the female connector on the control box. I need to find one with wires already attached as my soldering with pins so close is less than good.

PS: Hey boopy55 I can't reply to your message if you have private message receiving turned off!

Realagent

well I did my own version of the box
I havent added a speed control yest [ i bet a simple variable resistor POT will do it ]
I did add an LED switch for the heat pads so you know if there on [nice blue led inside a switch]
added a momentery switch to do the orifice contraction. [it works very very well]
For now I gave control to both tracks to one switch [makes for ease of use] But that can be changed in a matter of 5 mins as I have a second switch next to it not wired up.

As for the lube system didnt even want to use it. so nothing there . Much better to add lube yourself [cheaper on the lube too]

As shunt man says anyone interested in one I can make em and ebay it or whatever.
PS> uses the normal power supply that comes with the realtouch. plugs right into it at the side.

oops sorry about that realagent. private pms are on now.

(01-05-2010 10:01 PM)emumanx Wrote: [ -> ]well I did my own version of the box
I havent added a speed control yest [ i bet a simple variable resistor POT will do it ]
I did add an LED switch for the heat pads so you know if there on [nice blue led inside a switch]
added a momentery switch to do the orifice contraction. [it works very very well]
For now I gave control to both tracks to one switch [makes for ease of use] But that can be changed in a matter of 5 mins as I have a second switch next to it not wired up.

As for the lube system didnt even want to use it. so nothing there . Much better to add lube yourself [cheaper on the lube too]

As shunt man says anyone interested in one I can make em and ebay it or whatever.
PS> uses the normal power supply that comes with the realtouch. plugs right into it at the side.

NICE ONE! I do find having both belts on an on/off/on switch to be more "useful". with one switch controlling the belts, up is forward on both belts and down is reverse on both belts. This allows you to simulate sucking or thrusting. PS, you need a DPDT switch to do this.

Realagent