ø Realtouch Forum ø

You cant submerge the unit yet I don't see any way were all fluids are trapped with in the belts, from the video it looks like fluids can make there way down the sides of the belts dripping to other parts of the unit. Any one have any feed back on this?

And i still don't like the idea of having to log in and then pay for time to use something I own, should have a function for use with out videos. Or allow cheap video purchase.

Hmmm. That's a great question. I would think the sensitive internals would have to be pretty well sealed, but I see what you mean... Hope to hear some comments from people with experience with the device. I'd imagine rinsing as shown in the video would keep it reasonably clean, but I can see how buildup in hard to reach areas could be gross if the cleaning process isn't thorough...

I would imagine eventually there will be ways (either supported or unsupported) to use the device without the videos (or at least pay-to-own videos). I think what they're banking on is setting the hardware cost relatively low and making people subscribe as opposed to other toys like Venus 2000 or electrostimulation equipment that have a very high initial price for the equipment but can be used endlessly.

Does the material get sticky like the fleshlight does after washing? Adding baby powder to it does not seem like a good ideal for a mechanical device.

I can post a few pics possibly to ease your mind. The belts do not get sticky after washing. Also there is just about no way that lube and other liquids from your body can hit the motors.

That would be helpful... but ya gotta remember some of us are hung like a fire hose!!

I second that, I'd also like to see a few pictures of an opened realtouch

Jerj, that's actually something I'll be interested in learning about also, not only due to cleaning, but adaptability of the device too. (Not to get too off topic, but it's related).

With something like FleshLight, you can buy a liner to suit you (ie, tighter, etc.). I'm wondering how RealTouch adapts to different size penises.

I, for example, am on the smaller size of the average range (what can I say - some eastern Indian genes...but it works well and has a nice shape and is extra sensitive, so I'm happy - lol). So, I'm curious if sensation will be as good as say it would be with a very large cock.

And you raise a good point about how deeply the liquids go too...

Alright guys, here is a prototype unit with the belts off.....a few changes have been made to the final unit but this is pretty much the same.





As you can see the motors are contained outside of the belts, so there is really no chance for them to get wet. The only things that can wet are the apparatuses that control the belts and they have no electronic parts. The reason you can't submerge the unit is because of the plug on the back that goes into the minitower. Hopefully these pics help. Might have to pull them down though.

As for the pay per minute, can't help you there.

Not Bad, I like it

I get mine on monday ... i'll also take pics of the inside.